This product can be used to cleaning developing troughs, fixing troughs and water cleaning troughs of press and medical film processors of all types. Offering high cleaning efficiency and good performance up to the level of the world-advanced similar products, it will help to solve all problems you encounter in cleaning film processors and thus greatly facilitate your work.
Characteristics:
●Easy preparation, user friendliness, time-saving and labor-saving.
●No toxicity, no harm and no corrosion to machines.
● Rational formula design, fast removal of dirt deposited inside troughs.
● Regular use of this product can reduce the abrasion of transmitting devices and extend the service life of film processor.
Usage:
● Fill tap water into the trough and then empty the trough thoroughly.
● Prepare the cleaning agent into working solution in the proportion of 1:50 and fill into all the troughs of film processor.
● Raise the temperature to 35℃-38℃ and start up the processor and let it circulate for around 1 hour to thoroughly remove the dirt.
● Wipe the minor parts and transmitting devices of film processor with soft brush or soft wipe.
● Wipe the dirt out of the parts of film processor with brush that has a little original fluid, in this way a better cleaning effect can be achieved.
● Wash out the system to be cleaned with tap water for several times until it is neutral in tests with pH test paper.
Attention: Prevent the solution from spattering into skin and eyes
Packing: 1 liter×6 bottles/carton